Parallel AC-AC Converters Using Stationary Master Slave Control

Author Info

Taufik, Cleveland State UniversityFollow
F. E. Villaseca, Cleveland State University

Recommended Citation

Published in Proceedings of the 31st North American Power Symposium, October 1, 1999, pages 124-131.

NOTE: At the time of publication, the author Taufik was not yet affiliated with Cal Poly.

Abstract

This study proposes parallel ac-ac converters using Stationary Master Slave Control with Sinusoidal Pulse Width Modulation to achieve voltage regulation and equal current sharing among parallel generators such that it minimizes the total production cost. Development of Pspice model representing the parallel ac-ac converters is presented and then simulated. In addition, computer simulations are also used to perform robustness study on the parallel converters.

Disciplines

Electrical and Computer Engineering

Copyright

1999 IEEE.

Publisher statement

Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.