College - Author 1
College of Engineering
Department - Author 1
Mechanical Engineering Department
Degree Name - Author 1
BS in Mechanical Engineering
College - Author 2
College of Engineering
Department - Author 2
Mechanical Engineering Department
Degree - Author 2
BS in Mechanical Engineering
College - Author 3
College of Engineering
Department - Author 3
Mechanical Engineering Department
Degree - Author 3
BS in Mechanical Engineering
College - Author 4
College of Engineering
Department - Author 4
Mechanical Engineering Department
Degree - Author 4
BS in Mechanical Engineering
Date
6-2022
Primary Advisor
Peter Schuster, College of Engineering, Mechanical Engineering Department
Abstract/Summary
In this document, Cal Poly Senior Design Team F16 presents a summary of its work developing a suitable heatsink for Gas Technology Institute’s Methane Mitigation Thermoelectric Generator. After several months of iterating between experimental testing and simulated heat transfer, a suitable prototype was selected for use in further refining simulation parameters. This was called the structural prototype and it allowed Team F16 to confirm several remaining unknowns relating to component thermal conductivity. All documentation of this process can be found in Preliminary, Critical, and Interim Design Review documents (PDR, CDR, IDR), included in this report. Having a realistic model of the system enabled further rounds of simulation to select a heat fin array. This array was then added to the already existing structural prototype along with testing hardware to produce a final verification prototype. It performed satisfactorily during the team’s experimental testing, per GTI’s identified criteria and benchmarks. Team F16 also received sponsor confirmation that these results meet all project requirements. A final design and key recommendations for moving forward into high volume manufacturing are compiled along with this report.
URL: https://digitalcommons.calpoly.edu/mesp/665