College - Author 1
College of Engineering
Department - Author 1
Mechanical Engineering Department
Degree Name - Author 1
BS in Mechanical Engineering
College - Author 2
College of Engineering
Department - Author 2
Mechanical Engineering Department
Degree - Author 2
BS in Mechanical Engineering
College - Author 3
College of Engineering
Department - Author 3
Mechanical Engineering Department
Degree - Author 3
BS in Mechanical Engineering
College - Author 4
College of Engineering
Department - Author 4
Mechanical Engineering Department
Degree - Author 4
BS in Mechanical Engineering
Date
6-2022
Primary Advisor
Sarah Harding, College of Engineering, Mechanical Engineering Department
Additional Advisors
Peter Schuster, College of Engineering, Mechanical Engineering Department
Abstract/Summary
This project aimed to create a remote-control and drive system for a theatrical turntable that was constructed by the Theatre and Dance Department of California Polytechnic State University, San Luis Obispo. Over the course of three quarters, the team successfully designed and manufactured a working verification prototype. This verification prototype was then tested, and the project sponsor verified that it met all specifications. The current iteration of the verification prototype can support up to a load of 1400 lbf, rotate a 12 ft diameter turntable clockwise and counterclockwise with a speed range of 1 to 4 rpm, and is able to be controlled through the remote-control box. With the verification prototype successfully created and delivered to the Theatre and Dance Department, future productions in Spanos Theatre now have access to a fully functioning, automated turntable. This will allow for a unique set piece to be used in productions where more complex sets and choreography can be achieved.
URL: https://digitalcommons.calpoly.edu/mesp/659