College - Author 1
College of Engineering
Department - Author 1
Mechanical Engineering Department
Degree Name - Author 1
BS in Mechanical Engineering
College - Author 2
College of Engineering
Department - Author 2
Mechanical Engineering Department
Degree - Author 2
BS in Mechanical Engineering
College - Author 3
College of Engineering
Department - Author 3
Mechanical Engineering Department
Degree - Author 3
BS in Mechanical Engineering
Date
12-2017
Primary Advisor
Andrew Davol, College of Engineering, Mechanical Engineering Department
Abstract/Summary
Lifewater International, a Christian non-profit, trains locals to repair water well hand pumps in various third world countries. It would be beneficial to retrofit difficult-to-repair hand pumps with a locally-made pump cylinder such as HydroMission's "SlapShot". The majority of the components in the "SlapShot" can be easily obtained in rural third world villages. However, the thick leather gaskets required to seal the water cylinder during the pumping operation are imported. These thick leather gaskets are expensive, and when they fail, this results in pumps being out of commission for extended periods of time. Lifewater has presented this problem to a team of three undergraduate mechanical engineering students at California Polytechnic State University, San Luis Obispo with the goal of being able to locally source and manufacture an adequate seal to replace the current thick leather seal.
URL: https://digitalcommons.calpoly.edu/mesp/404