Recommended Citation
Published in Industrial Electronics, 2006 IEEE International Symposium, July 9, 2006, pages 988-992.
The definitive version is available at https://doi.org/10.1109/ISIE.2006.295770.
Abstract
This paper presents a phase shifting method to adjust the combined output voltage of two hybrid loaded resonant converters connected in parallel. The method implements a fixed switching frequency and hence it is particularly useful in applications such as medical instrumentation where audible noise is not desirable. The design and analysis of parallel hybrid resonant converters operating in discontinuous conduction mode using the phase shifting method is described. Computer simulation to prove the feasibility of the phase shifting method in the design example is also provided. Analysis of the characteristics of the output voltage produced by phase shifting control along with the steady state output analysis of the hybrid loaded resonant converters is also discussed.
Disciplines
Electrical and Computer Engineering
Copyright
2006 IEEE.
Publisher statement
Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.
URL: https://digitalcommons.calpoly.edu/eeng_fac/200