College - Author 1
College of Engineering
Department - Author 1
Biomedical Engineering Department
Degree Name - Author 1
BS in Biomedical Engineering
College - Author 2
College of Engineering
Department - Author 2
Biomedical Engineering Department
Degree - Author 2
BS in Biomedical Engineering
College - Author 3
College of Engineering
Department - Author 3
Biomedical Engineering Department
Degree - Author 3
BS in Biomedical Engineering
Date
3-2024
Primary Advisor
Benjamin Hawkins, College of Engineering, Biomedical Engineering Department
Abstract/Summary
The design process for this device involved two major phases: AutoCAD design and prototype manufacturing. In AutoCAD, the device was fully designed according to the dimensions that best suit our purpose of single-cell transfection while meeting the customer requirements and specifications, which will be touched on shortly. The AutoCAD design provided a high aspect ratio microchannel for inertial flow, a serpentine winding channel for chaotic mixing and 3 inlets; one for oil and two for aqueous phases. The AutoCAD design was printed onto a silicon wafer using a dark field photoresist mask, which is necessary for the second major design phase: prototype manufacturing. Prototype manufacturing included preparing the wafer, molding and setting the PDMS polymer on top of the wafer, and cutting out our devices. All of this was done successfully.
The device was designed to meet important customer requirements and specifications, which includes an improved device design that optimizes aqueous droplet formation in a continuous oil phase. The device is also integrated with current benchtop syringe pumps and successfully uses oil to pinch off droplets for single cell encapsulation. The device is 1”x3” with a high aspect ratio microchannel system. It has three inlets which allow for single cell encapsulation and droplet formation.
The device production process was extensive and difficult, but was accomplished successfully. Out of the many devices we produced there was a low functional yield rate, but we managed to create a functional device that effectively created droplets. This was our cornerstone and most fundamental test, which was proper droplet formation. This massive success will allow us to perform all of the cell work tests, which are effectively much easier given the consistently functional nature of our device.
URL: https://digitalcommons.calpoly.edu/bmedsp/234